Tong Eann Shutters Co., Ltd.

27 Product(s) found

Bracket Sets

Model : 800 010 036~045

1. Bracket set was accessory designed for side motor. 2. It was a necessary accessory for side motor operation. 3. Bracket set consists of gear chain, dummy ends, bearing and shaft. 4. Bracket set was usually used for the weight of door under ...

Steel Wall Brackets

Model : 200351001

1. Wall bracket suitable used for blind and shade operation system. 2. Wall bracket have to operate with bracket pin stud, motor pin stud at the head side of tubular motor and end cap, bearing at the end side of motor. 3. All of the ...

Sprocket Sets

Model : 800 010 700

1. Sprocket was designed for the weight of side motor over 500kg. 2. Sprocket consists of two gears, Chain, dummy ends, two bearings and shafts. 3. It have to fix on steel board for operation.

Tubular Motors

Model : DS & TE TYPE

1. Tubular motors with low noise for projection screens, awnings, window roller shades, in diameter 35mm with torque from 3 ~ 15Nm, 15 ~ 30rpm; 45mm from 4 ~ 40Nm, 12 ~ 30rpm. 2. R system like TE403-30R operated with mechanical limit switch, ...

Tubular Motors

Model : R-SYSTEM

R-System applies a highly reliable technology and has evolved to some of the most reliable products on the market today.

Plastic Bearings

Model : 200 351 005

1. Plastice bearing was applied for end of tubular motor and it was usually screwed on the wall bracket. 2. Plastic have to operate with end cap and they are usually applied on shutter operator system. 3. Light shutter was suitable for ...

Remote Controls

Model : 200 050 507

1. TESC radio remote control (Group Control) was design for tubular motor and other type roller shutter motors. 2. It can control up to 15 motors and applied for remote control integrated in tesc tubular motors. 3. Leading ...

Remote Controls

Model : 200 050 508

1. Radio remote control (Individual Control) for tubular motor and other type roller door motors. 2. Leading technology and model design with anti-code function and applied for remote control integrated in tesc tubular motors.

Push Bottom Switches

Model : 800 030 001

1. Push bottom switch was popular applied for rolling door motor and other shutter operators. 2. Colorful button design for easilier identify.

Roller Door Motors ( Side Motors)

Model : 800 010 036~100

Characteristics of rolling door motors & operators: 1. Side motor (like DS-30) has lifting capacity from 300kgs to 3000kgs, also with manual and electric operation. With other accessories to form into fire-proof shutters. 2. With barrier ...

1 2 3 Next »

Contact us

Company Name :Tong Eann Shutters Co., Ltd.
Contact Person :Ms. Jessie Chen
Address :No. 22, Lane 130, Huh Ann Rd., Ching Sho
Country :Taiwan Taiwan
Telephone :886-4-26112999
Fax :886-4-26112826