Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. Collant unit.
8. Spindle chiller.
9. Work lamp.
10. Air blast.
11. Heat exchanger.
12. Tool box with leveling bolts & pads.
13. One set of AGMA operational manual.
14. One set of control operational manual.
Description of optional accessories:
1. Full length enclosure VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
2. CE compliance.
3. EMC compliance.
4. 4th axis rotary table.
5. Tilting table.
6. Coolant through spindle (CTS).
7. 6,000 RPM gear driven spindle (50 Taper).
8. 8,000 RPM belt driven spindle (50 Taper).
9. High pressure coolant pump.
10. Tool Probe (renishaw or specified Brand).
11. Tool pre-setter.
12. Oil tool block.
13. Graphite machining fixture.
14. Chip conveyer.
15. Optional controller (please specify).
Model: vmc-229. 1. Travel: (1) x axis travel: 2200mm (86.61"). (2) Y axis travel: 900mm (35.43"). (3) Z axis travel: 700mm (27.56"). 2. Distance of spindle end to table: 150mm~850mm (5.91"~33.46"). 3. Distanter of spindle center to column: 980mm (38.58"). 4. Table table size: 2400mmx900mm(94.49" x 35.43"). 5. Load capacity: 4000kg (8800 lbs). 6. Work area: 2200mm x 900mm(86.61" x 35.43"). 7. Feed rate: (1) Rapid traverse x axis: 10m/min (393.7 ipm). (2) Rapid traverse y axis: 10m/min (393.7 ipm). (3) Rapid traverse z axis: 8m/min (314 ipm). 8. Cutting feed rate: 0~10,000 mm/min. 9. Pull stud mas: p50t-1 (45o). 10. Numbers of tools: 32. 11. Max. Tool dia. applicable: 125mm (4.92"). 12. Max. Tool length applicable: 300mm (11.8"). 13. Max. Tool weight applicable: 8kg (17.6 lbs). 14. Tool selection random: arm type. 16. Motor spindle: ac 11/15kw. 17. Axis x/y/z: 3.3/3.3/3.3kw. 18. Spindle: spindle taper bt-50/(cat-50). 19. Type of transmission belt transmission. 20. Geat ransmission. 21. Speed: 6,000 rpm/4,000rpm. 22. Misc. Machine weight: 20,000kg (44,000 lbs). 23. Machine height: 3.4m (133.9"). 24. Floor space: 5.8mx3.9m (228.4" x 153.4"). 25. Positioning accuracy: 0.004mm/500mm. 26. Repeatability: 0.005mm.
Taiwan
