Power Chuck

3 Jaw Wedge Type Through Hole Power Chucks

Model : N-200

1. More large bore: It's a wedge type with the largest bore. 2. Highest revolution: with the strongest graping power and the small sized light weight it is able to be more stable while at a highest revolution.That's more favorable foe ...

3 Jaw Wedge Type Through Hole Power Chucks (With Adaptors)

Model : N-200A

1. More large bore : having the largest bore in wede type power operated chucks. 2. 20% larger bore : approximately 20% higher speed, higher gripping force and larger bore compared with usual chucks. 3. Model N-200A chucks are assembled with ...

Vertical & Horizontal Stationary Power Chucks

Model : DOV/DON SERIES

1. Suitable for vertical milling and dritting operations. 2. With large throagh-hole, Vertical / horizontal power chucks not only can glip the long workpiece bat also can do horizontal holding.

3 Jaw Wedge Type Extra Large Through Hole Power Chucks (With Adaptors)

Model : NB-200A

1. More large bore: having the largest bore in wede type power operated chucks. 2. 20% large bore: approximately 20% higher speed, higher gripping force and larger bore compared with usual chucks. 3. Model N-200A chucks are assembled with ...

2 Jaws and 3 Jaws Through Hole Power Chucks (With Adaptors)

Model : NHT

1. Gripping of round or irregular workpiece does not need to change the chuck. 2. The chucks are designed according to ASA B5.9 type A spindle. 3. The chucks are made from hight alloy steel. All siding surfaces are hardened and ground for ...

4 Jaw Wedge Type Through Hole Power Chucks (Without Adaptors)

Model : NIT-200

1. All sliding surfaces are hardoned and ground for accurate running andlong service repeatability. Lubrication nipple in each master jaw. 2. Base jaw: 1.5mm X 60° serrtion. 3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type A ...

4 Jaw Wedge Type Through Hole Power Chucks (With Adaptors)

Model : NIT-200A

1. 4 jaw wedge type through hole power chucks with adaptor. 2. Mounting: adator mounting to fit DIN, ISO, BS, ASA B5.9 type A spindles.

2 Jaw Wedge Type Through Hole Power Chucks (Without Adaptors)

Model : NT-200

1. All sliding surfaces are hardoned and ground for accurate actual running andlong service repeatability. Lubrication nipple in each base jaw. 2. Base jaw: 1.5mm X 60°serrtion. 3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type ...

3 Jaw Wedge Type Through Hole Power Chucks (With Adaptors)

Model : VA

1. Direct mounting: direct mount gor VA series chucks onto short taper spindles of ASA and JIS standards. 2. High preformance: similar high preformance to N series. 3. Chuck mounting screws: metric UNC socket head cap screws are supplied for ...

3 Jaw Wedge Type Non Through Hole Power Chucks (Without Adaptors)

Model : V

1. Direct mounting: direct mount gor VA series chucks onto short taper spindles of ASA and JIS standards. 2. High preformance: similar high preformance to N series. 3. Chuck mounting screws: metric or UNC socket head cap screws are supplied ...

Company Name :	Di Chun Iron Work Co., Ltd.
Contact Person :	Mr. Chia Chi Chen
Address :	NO. 321, Sec. 1, Hsi Nan Rd., Hsi Bah Ts
Country :	Taiwan
Telephone :	886-4-23354376
Fax :	886-4-23352874

Di Chun Iron Work Co., Ltd.

Contact us