Ming Dih Industry Co., Ltd.

15 Product(s) found

TEST

規格 SB-211 S-211 S2-211 S3-211 粒徑 1.2-1.8mm 0.9-1.3mm 0.7-1.0mm 0.5-0.8mm ...

Expandable Polystyrene (EPS)

Model : GENERAL PURPOSE

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : FAST CYCLE-211

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : FAST CYCLE-211

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : FAST CYCLE-211

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : FAST CYCLE-211

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : GENERAL PURPOSE

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : GENERAL PURPOSE

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : GENERAL PURPOSE

1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. ...

Expandable Polystyrene (EPS)

Model : SELF-EXTINGUISHING

Self-extinguishing (Flame-retardant) UL94: 1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when ...

1 2 Next »

Contact us

Company Name :Ming Dih Industry Co., Ltd.
Contact Person :Mr. Simon Lin
Address :No.9, Juguang 1st St., Daliao Dist.,Kaohsiung City, 831, Taiwan (R.O.C.)
City :Kaohsiung City
Country :Taiwan Taiwan
Website :http://www.mingdih.com.tw
Telephone :886-7-7872411
Fax :886-7-7872414