Content: Prisms Optical Components Customized Light Guide Prism PARAMETER: Prisms:Right angle prism, Dove prism, Beam splitter, Penta Prism, Corner prism, Trapezium Prism, Rhomoboid Prism, Roof Prism, Cube prism, customized prisms,etc. Flatness 2λ-λ/10 Surface Quality 80/50-10/5 Angle Tolerance 3’-15’’ Clear Aperture >85%-95% Chamfer 0.3mm×45°-0.1mm×45° Coating As per customer’s requirement More information you can view here.
Content: Prisms Optical Components High Precision Dove Prism, BK7 Glass Dove Prism, Fused Silica Dove Prism Supplier China PARAMETER: Dove prisms have an unusual and very interesting characteristic , if you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal peformance, use dove prisms with collimated light. Specification Material BK7 glass / Fused Silica Dimension tolerance + 0.0 / -0.2mm Deviation 3arc min. Flatness λ/2@632.8nm Clear aperture >85% Surface ...
Content: Prisms Optical Components Custom Right Angle Prism, BK7 Glass Right Angle Prism, UV Fused Silica Right Angle Prism Manufacturer China PARAMETER: Right angle prisms are extremely versatile optical components, commonly used as individual prisms and components of optical assemblies. A beam of light entering the leg of a right angle prism will deviate by a nominal value of 90°, while precise rotation of the prism controls beam alignment. When light enters the hypotenuse of the prism, it is commonly called a porro prism. In this configuration, a light beam will undergo 180° ...
Content: Optical Windows Optical Components Digital Electronic Products Windows PARAMETER: Windows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the ...
Content: Optical Windows Optical Components High Quality Square Windows, Optical Glass Square Windows, Fused Silica Square Windows Supplier China PARAMETER: Windows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and ...
Content: Optical Windows Optical Components Optical Glass Optical Round Windows PARAMETER: Windows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the ...
Content: Optical Mirror Optical Components PARAMETER: A dielectric mirror, also known as a Bragg mirror, is a type of mirror composed of multiple thin layers of dielectric material, typically deposited on a substrate of glass or some other optical material. By careful choice of the type and thickness of the dielectric layers, one can design an optical coatingwith specified reflectivity at different wavelengths of light. Dielectric mirrors are also used to produce ultra-high reflectivity mirrors: values of 99.999% or better over a narrow range of wavelengths can be produced ...
Content: Optical Mirror Optical Components Customized Optical Mirror PARAMETER: BRD Optical provide the round, square and customized shape mirrors with a protected gold coating in various sizes. Protected gold is ideal for use in the IR wavelength range. A protective dielectric overcoat is layered over the gold to help protect it from damage and make cleaning easier. These optics provide >96% average reflectance from 800nm to 20μm. The mirror coated with metal (Au, Al, or Ag) over coated with silicon monoxide(SiO2). Metallic coatings have low peak reflectance, mechanical ...
Content: Optical Mirror Optical Components Customized Shape Optical Aluminum Mirror PARAMETER: BRD Optical provide the round, square and customized shape mirrors with a protected Al coating and UV Enhanced Al coating in various sizes. Specification Substrate Fused silica/ Silica/ BK7 Glass Dimension 2mm~100mm Clear aperture >90% of dimension Surface quality 40/20, 20/10 Scratch-Dig Surface Irregularity λ/2~λ/10 @632.nm Thickness 1mm~20mm More information you can view here.
Content: Dome Optical Components PARAMETER: BRD Optical dome lens is composed of two parallel optical surfaces, (A convex surface & A Concave surface). Normally we can control the parallel tolerance
Content: Cylindrical lens Optical Components Optical Components Cylinder Lenses PARAMETER: Cylinder Lenses are typically used to focus incoming light to a line, or to change the aspect ratio of an image. Cylindrical Lenses have a single cylindrical surface that causes incoming light to be focused in only a single dimension, stretching the image. Cylinder Lenses are available with positive or negative focal lengths, ideal for laser line generation or anamorphic beam shaping to circularize laser outputs. Specification Material Optical glass/ Fused silica/ sapphire ...
Content: Cylindrical lens Optical Components PARAMETER: Achromatic Lenses are used to minimize or eliminate chromatic aberration. The achromatic design also helps minimize spherical aberrations. Achromatic Lenses are ideal for a range of applications, including fluorescence microscopy, image relay, inspection, or spectroscopy. An Achromatic Lens, which is often designed by either cementing two elements together or mounting the two elements in a housing, creates smaller spot sizes than comparable singlet lenses. Specification Material Crow glass & Flint ...
Content: Cylindrical lens Optical Components PARAMETER: Meniscus Cylindrical Lens can increase the NA of the system while only adding slightly to the total spherical aberrations. The Negative Meniscus Lens is used to increase the focal length of another lens while maintaining the angular resolution of the optical assembly. This lens shape is best used when one conjugate is relatively far from the lens. Specification Material Optical glass/ Fused silica/ sapphire etc. Dimension 2mm~300mm Dimension tolerance ±0.05mm~±0.1mm Centre Thickness 2mm~20mm Surface quality 60/40， ...
Content: Cylindrical lens Optical Components PARAMETER: A plano-concave cylindrical lens is used to expand light in on axis. A negative cylindrical lens is able to diverge collimated input light away from a line. Plano-concave cylindrical lenses are used for one-dimensional compression of images, anamorphic beam shaping, and laser line generation. Specification Material Optical glass/ Fused silica/ sapphire etc. Dimension 2mm~300mm Dimension tolerance ±0.05mm~±0.1mm Centre Thickness 2mm~20mm Surface quality 60/40， 40/20， 20/10 Surface accuracy 532nm Clear ...
Content: Cylindrical lens Custom Made Cylindrical Lens, Optical Glass Plano Convex Cylindrical Lens A plano-convex cylindrical lens is used to condense light in one axis. A positive cylindrical lens is able to create a line image from a point of light, to change the aspect ratio of an image or to focus collimated input light to a line. Plano- convex cylindrical lenses are typically used for illumination of slit and line detector arrays, laser projection, laser line focussing and anamorphic beam shaping. Specification Material Optical glass/ Fused silica/ sapphire ...
| Company Name : | ChangChun BRD Optical co., Ltd |
|---|---|
| Contact Person : | Ms. Sandy  |
| Address : | No.399 Bo Cai Road, High-Tech Industrial Development Area, Changchun, Jilin, China 130012 |
| City : | changchun |
| Province / State : | jilin |
| Country : |  China |
| Telephone : | 0086-431-81884163 |
