The Best of Made in Taiwan
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time ...
Self-extinguishing (Flame-retardant) UL94: 1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the ...
Self-extinguishing (Flame-retardant) UL94: 1. Preforming: The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³. 2. Conditioning: Generally, 6-48 hours is recommended, depends on the density. Between the ...
Taiwan