Equipped with Japanese Brand, TETRA-K INVERTER-Controlled POWER SUPPLY, TH-26VF, TH-50VF, TH-50VFS (Optional), with the positives as below;
frequency changes automatically according to the welding current, thus the ideal
direct current can be fed.
current, second voltage, or second power can be controlled in any desired
pattern by software.
3. Settings can
be done easily by observing bright display (LCD with back light)
4. 15 welding
conditions and various input/output signals are available, considering the
possible connection to such as pressurized output and other
5. Good or No
Good judgment can be done by current value monitoring either in the constant
power mode or the constant voltage mode.
6 The Maximum
setting conditions is 9 for 2 welding cycles setting value (Except TH-50VFS)
7.Peak value of
the welding current becomes low, thus splash becomes less.
control is done with high accuracy and high-speed responded by 16 bits high
performance calculation circuit.
9.External setting / Operation / Mode status monitoring or data control can be documented by communication function. (This function is available in optional device RS-232 and RS-422.)
1.KVA Range: 8KVA, 17KVA & 25KVA
2.Input: 220V / 380V
4.Pneumatic Control System
you can not find the needed model in our cataloque, please inform us the
specifications in detail. Our engineers will work with you to customize machine
to your specific application requirement.
are subject to change without prior notice due to constant improvements.