|
Technology
|
|
Standard
|
IEEE 802.3 10Base-T Ethernet
|
|
|
IEEE 802.3u 100Base-TX Fast Ethernet
|
|
|
IEEE 802.3x Flow Control and back-pressure
|
|
|
IEEE 802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
|
|
Performance
|
|
Forwarding Mode
|
Store and Forward & Pure Converter
|
|
Packet Buffer Memory
|
128K bits
|
|
Transfer performance
|
10Base-T: 14,880pps, 100Base-TX: 148,800pps
|
|
Interface
|
|
Ethernet Port
|
DS101-M-SC/DS101-S-SC:
1 x 10/100Base-TX RJ45, Auto Negotiation
1 x 100BaseFX (SC Connector)
DS101-M-ST/DS101-S-ST:
1 x 10/100Base-TX RJ45, Auto Negotiation
1 x 100BaseFX (ST Connector)
*WDM model by request
|
|
System LED
|
1 x Power: Green On
1 x Mode: Converter mode (Green On), Store and Forward mode (Green off)
1 x LLF: LLF Happens (Red On)
|
|
Ethernet Port LED
|
LINK: Link (Green On), Activity (Green Blinking)
FDX: 100 Mbps Full Duplex (Amber on), 100Mbps Half Duplex & Collision (Amber Blinking)
|
|
Fiber Port LED
|
LINK: Link (Green On), Activity (Green Blinking)
FDX: Full Duplex (Amber on)
|
|
DIP Switch
|
1 x Set Forwarding Mode (On: Converter; Off: Store & Forward)
1 x Set RJ45 in 100 Mbps Half Duplex Mode or Auto-Negotiation (On: Half Duplex; Off: Auto-Negotiation)
1 x Enable/disable Link Loss Forwarding (On: Enable; Off: Disable)
|
|
Power Input
|
3-Pin Removable Terminal Connector with Power Redundancy, Polarity Reverse Protection
V1+, V2+: Redudant Power Input (V+)
V-(COM): Common Power-GND (V-) for V1 and V2
|
|
Optical Fiber
|
|
|
Distance FP Laser Wavelength TX Range RX Range Link budget
|
|
Single-Mode
|
30KM 1310 (1260~1360) -8~-3dBm -32~-3dBm 24dB
|
|
Multi-Mode
|
2KM 1310 (1260~1360) -20~-12dBm -30~-3dBm 10dB
|
|
Power Requirement
|
|
Input Voltage
|
12/24V/48DC (9~60 VDC)
|
|
Reverse Polarity Protect
|
Yes
|
|
Input Current
|
0.07A@24V
|
|
Power Consumption
|
Max. 1.66W@24VDC
Full traffic, suggest to reserve 15% tolerance
|
|
Mechanical
|
|
Installation
|
DIN Rail
|
|
Enclosure Material
|
Steel Metal
|
|
Dimension
|
30(W) x 70.5(H) x 81.7(D) mm / without DIN Rail clip
|
|
Ingress Protection
|
IP41
|
|
Weight
|
0.2kg without package
|
|
Environmental
|
|
Operating Temperature & Humidity
|
-40°C~75°C , 0%~95% Non-Condensing
|
|
Storage Temperature
|
-40°C~80°C
|
|
MTBF
|
>200,000 hours
|
|
Hi-Pot Insulation
|
AC 1.5KV for Power/Ethernet port to Chassis Ground
|
|
Warranty
|
5 years
|
|
Standard Compliance
|
|
EMC
|
IEC / EN61000-6-2/EN61000-6-4
|
|
EMI
|
CISPR 22, FCC part 15B Class A
|
|
EMS
|
EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT,
EN61000-4-5 Surge, EN61000-4-6 CS, EN61000-4-8 Magnetic Field
|
|
Railway
|
EN50121-4
|
Taiwan