XM-23R2G is 2 Ports 1000 Mbps Ethernet test module for SFP connectors. The major benefits include optimized for testing Ethernet device and environment and layer 2 to 7 traffic simulation, including any user defined pattern or recently developed protocol etc.
1. Interface: 2 SFP 1000 Mbps ports.
2. Speed and mode: 1000Mbps full duplex Only.
3. CPU: MPC852T.
4. Preamble: 4~16 bytes.
5. Frame length(w/o VLAN Tag): 48 ~ 8192 bytes fixed / increase / Random / loop / decrease.
6. Data field: system defined/ user defined/ random.
7. Inter frame gap: fixed/ random; 1000 Mbps: 48 ns ~ 0.2 sec.
8. Data integrity / sequence: yes.
9. Source/ destination MAC address: fixed / increase / decrease / Random; variable fields can be set depends on UI, max length of each field is 32-bit.
10. Source/ destination IP address: fixed / increase / decrease / random.
11. IP/TCP generation/ analysis: hardware.
12. VLAN(VLAN ID/COS field): (VLAN ID / COS field): fixed / increase / decrease / random.
13. MPLS(Label/COS/TTL firld): fixed / increase / decrease / random; (No. of labels not limited).
14. Flow control: default as reception.
15. Capture buffer size: 32MB per port, (up to 256k frames).
16. Capture mode: event.
17. Capture event: all condition, CRC error, DI error, serial No. error, alignment error, IP checksum error, trigger 1 ~ 8, trigger logic, any defined packet size.
18. QoS testing: up to 8 priority queues.
19. Line performance: wirespeed.
20. Error packet generation: No CRC, CRC error, alignment error, IP checksum error, dribble error.
Taiwan
