The PRP-076 impact dot-matrix receipt printer is easy to operate, space-saving, and offers optimal performance at a competitive cost. Its special strength in high-speed, plain-paper printing makes it essential for check and validation applications among others.
1. Printing method: 9 pins, impact dot matrix.
2. Dot density:
(1) 210 DPL(full dot), 420 DPL(half dot).
(2) 200 DPL(full dot), 400 DPL(half dot).
3. Printing direction: unidirectional with friction feed.
4. Printing speed: 3.5 line/sec.
5. Printing width:
(1) 42CPL (7 x 7) / 35CPL (5 x 7).
(2) 40CPL (7 x 7) / 35CPL (5 x 7).
6. Paper width: 76 ± 0.5 mm.
7. Paper feed speed: 100 mm/sec.
8. Interfaces serial port:
(1) Dsub 25 pin female connector, 9600 or 19200 bps.
9. Parallel port:
(1) 36 pin centronics. 8 bits parallel, supports BUSY/nack protocol.
10. Cash drawer port: DC 24V/1A, 6 wire RJ-11 socket.
11. Print font: ASCII code:
(1) 5 x 7 dots, 1.57 (W) x 2.47 (H) mm.
(2) 7 x 7 dots, 1.25 (W) x 2.47 (H) mm.
12. Graphic font: 16 x 16 dots, 2.54 (W) x 2.82 (H) mm.
13. Print commands: ESC/POS print commands set.
14. Reliability: 5,000,000 lines (MCBF).
15. Weight: 1600(g).
16. Dimension: 225 (L) x 140 (W) x 135 (H) mm.
17. Auto cutter: optional, depends on model.
18. Operating temperature: 0˚C to +50˚C.
19. Storage temperature: -10˚C to +60˚C (except paper).
20. Operating humidity: 10% to 80% RH.
21. Storage humidity:10% to 90% RH (except paper).
22. Supply voltage:
(1) Input-AC 110V/220V, 50~60Hz.
(2) Output-DC 24V/2.5A".
Taiwan
