1. HMP are non-inductively wound with a metallized polypropylene/polyester film dielectric/electrode, encapsulated in flame retardant (UL94, V-O) plastic case and epoxy resin end seal.
2. Feature:
(1) Interference suppressors.
(2) Excellent safety mechanisms.
(3) Ensures long life.
(4) High-moisture and thermo stability resistance.
3. Application:
(1) Motor run ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection.
(2) By connecting the capacitor in series with the starting winding motor, allow motors with two or three windings to function on a single-phase supply.
1. Base specification: (1) IEC 33 (C0) 77: Used for AC motor application). (2) JIS C 4908: used for electrical apparatus.
2. Climate category:
3. In accordance with DIN40040 HSFa)H=minimum limit temperature: -25℃b), S=maximum limit temperature: +70℃c), F=humidity category: average relative humidity: ≦75%, 95% for 30 days per year, continuously; 85% for the remaining days occasionally.
4. Rated voltage: 250, 350, 400, 450 V.AC, 50~60 Hz.
5. Capacitance range: 0.1~15.0uF.
6. Capacitance tolerance: J (±5%), U (+10, -5%), K (±10%)/withstand Voltage:a)between terminals: 1.5 x rated voltage for 10s.b)between terminals and case: 2 x rated voltage + 1000 V (1500 V Min.) for 60 s.This test occasional self-healing breakdown are allowed.
7. Dissipation factor: ≦0.1% at 200 V.AC, 60 Hz and 20℃ (HMP type) ≦0.3% at 200 V.AC, 60 Hz and 20℃ (HME type)/insulation resistance:a)between terminals: 10 x 103 MΩ for C≦1.0uF; ≧10 x 103 MΩ.uF for C≦1.0uFb)between terminals and case: ≧10 x 103 MΩ.
8. Electrical connecting1 HMP/HME-A: fastion terminals.2.HMP/HME-S: tinned copper clad steel wire radial leads.3.HMP/HME-W: soldering terminals.4.HMP/HME-P: UL 1015 or UL 1007 stranded PVC insulation wire.
Taiwan
