San Jose Technology, Inc.

GPS /GLONASS Signal Re-radiating for Indoor Satellites Signal Reception

Product Name :: GPS /GLONASS Signal Re-radiating for Indoor Satellites Signal Reception

Model No :: RK-106

Description
Specification
Features
Applications

Overview

RK-106 is a complete GPS/GLONASS L1 band signal re-radiating system with dual antennas to re-transmit real-time GPS/GLONASS satellite outdoor reception to an indoor environment. The system kits include a high gain external GPS /GLONASS antenna, a precisely calibrated amplifier circuit with ceramic patch re-radiator, and a built-in power supply regulator. The ceramic patch re-radiator allows multiple GPS/GLONASS receivers perform on-the-fly receiver performance within a closed environment, while the main GPS/GLONASS antenna is located on an unmanned outdoor location. GPS/GLONASS center frequency is1590MHz. The input signal power at the receiving antenna is approximately -130dBm, so the desire signal is below the thermal noise floor. The whole system is designed as PNP (Plug-and-Play) hardware and it can be installed either temporarily or permanently to a secured location by using whether dashboard suction cup or screws.

Wherever in lab/building/underground garage, RK-106 guarantees to bring and re-radiate GPS/GLONASS signal that meets your requirement.

Specifications:

Category	Specifications
General Description	Professional GPS/GLONASS re-radiating system
Physical Construction	Construction: Polycarbonate radome enclosure, cast die at the bottom, sealed with weatherproof rubber.
	Dimensions: Antenna:80mmin diameter &71.24mmin height Ceramic patch re-radiator:79mm(W) x85mm(L) x113mm(H) Regulator: 65mm (L) x 32mm (W) x 43mm (H)
	Cable Length: 40m RG-58 A/U
	Standard Connector: Antenna: TNC Jack, re-radiator: SMA Jack
	Weight: Antenna: 245g Ceramic patch re-radiator:215g Regulator:85g
	Standard Mounting: Stainless bracket mount
Performance Specification	External Antenna	Polarization: R.H.C.P.
		Absolute Gain @ Zenith: +4 dBic typically
		Gain @ 10° Elevation: -5 dBic typically
		General: 1575/1602 MHz (CF:1590 MHz)
		Gain: 27 dB typically
		Bandwidth: 40 MHz @Return Loss ≦ -10 dB
		Noise Figure: 1.5 max.
		Axial Ratio: 3 dB max.
		VSWR: 2.0 max.
		Output Impedance: 50 ohm
	Ceramic patch Re-radiator	Re-radiating Range: 10m
Electrical Specification	Supply Voltage: 100~240V AC to 7.5V~12V DC Regulator
	Power Consumption: 48mA (+/- 5%) @ 7.5V DC
Environmental Specification	Operating Temperature: –30°C to +80°C
	Storage Temperature: –40°C to +85°C
	Operating Humidity: 95% RH, non-condensing