PC based CNC control.
Graphic conversational input function.
Powerful vacuum suction table.
Variable spindle speed controlled by frequency inverter.
Air cylinder counter-balance on z-axis for high machining accuracy.
Heavy gauge steel frame of machine is tempered for deformation-free.
Linear guide ways on 3 axes.
3 axes traverses are transmitted by high precision ball screws, and driven by servo motors.
The spindle accommodates router bit and shaper cutter. (ROU-1509 only)
18000 RPM high spindle speed.
Air cooling for spindle.
| Model | ROU-403J-PB |
| Capacity | Max. workpiece sizes | 1500×950×200 mm |
| Travel | X-axis travel | 1500 mm |
| Y-axis travel | 900 mm |
| Z-axis travel | 230 mm |
| Spindle nose to table | 235 mm |
| Spindle center to column face | 1000 mm |
| Table | Table area | 900×1500 mm |
| Feed rate | Cutting feed rate | 6 M / min |
| X-axis rapid traverse | 16 M / min |
| Y-axis rapid traverse | 16 M / min |
| Z-axis rapid traverse | 16 M / min |
| Spindle | Spindle speed | 500~20000 rpm |
| Spindle diameter | Ø40 |
| Spindle taper | ER 32 |
| Motor | Spindle motor | 7.5 HP |
| X-axis motor | 1 kw |
| Y-axis motor | 1.5 kw |
| Z-axis motor | 0.75 kw |
| Vacuum pump motor | 5 HP |
| cutter | Router bit sizes | 3~40 mm |
| Collect sizes | 3~16 mm |
| Max. shaper cutter sizes (Dia.×L) | Ø125×50 mm |
| Others | Air pressure required | 6 kgf / cm2 |
| Net weight | 2000 kgs |
| Gross weight | 2200 kgs |
| Machine size | 2300×2600×2130 mm |
| Packing dimensions | 2520×2280×1800 mm |
Taiwan
