1. Table:
(1) Table size (mm): 1900x500.
(2) X axis travel (mm): 1300.
(3) Y axis travel (mm): 950.
(4) Z axis travel (mm): 800.
(5) T-slot (width x trough number x pitch) (mm): 18x5x80.
(6) X feedrate (variable) (mm/min): 30~2800.
(7) Y feedrate (variable) (mm/min): 30~2800.
(8) Z Axis feedrate (variable) (mm/min): 30~2800.
(9) X Axis rapid travel (mm/min): 2800.
(10) Y Axis rapid travel (mm/min): 2800.
(11) Z Axis rapid travel (mm/min): 2800.
2. Range of cutting reference:
(1) Cutting length (parameter)(mm): 1300.
(2) Cutting width (parameter)(mm): 520.
(3) Cutting height (parameter)(mm): 520.
(4) Loading weight (parameter)(kgs): 1500.
3. Spindle (vertical):
(1) Spindle speed R.P.M(60HZ)(RPM): 45~1500(18 steps).
(2) Spindle taperi@: NT50.
(3) Distance of spindle nose to table surface (mm): 0~603.
(4) Distance of spindle center to column (mm): 550.
4. Spindle (horizontal):
(1) Spindle speed R.P.M(60HZ)(RPM): 45~1500 (18 steps).
(2) Spindle taper: NT50.
(3) Distance of spindle center to table surface: 10~810.
(4) Distance of spindle nose to table surface: 290.
1. Power: (1) Spindle motor: 10HPx4P AC. (2) X axis feed motor: 2HP. (3) Y axis feed motor¡@: 2HP. (4) Z axis feed motor¡@: 2HP. 2. Packing dimension: (1) L x W x H (after packing)(mm): 3090 x 2280 x 2550. (2) Net weight (before packing)(kgs): 6000kg. (3) Gross weight (after packing)(kgs): 7000kg.
Taiwan
