1. Model: JMH-500(NO40.).
(1) X-travel: 800 (31.50").
(2) Y-travel: 725 (28.54").
(3) Z-travel: 725 (28.54").
(4) Spindle center to table surface: mm (in.) 50~775 (1.97"~30.51").
(5) Spindle nose to table center: mm (in.) 150~875 (5.91"~34.45").
(6) Table surface to floot: mm (in.) 1100 (43.30").
2. Table:
(1) Table dimension: mm (in.) 500 x 500 (19.69").
(2) Max. loading weight: kg (lb) 800 (1764).
(3) Screw type: 24-M16XP2.0.
(4) Min. indexing angle: deg. 1° (OPT0.01°/5°).
3. Spindle:
(1) Spindle speed: min-1 (rpm) 8000.
(2) Spindle nose: 7/24 TAPER NO.40.
(3) Dia. of spindle: mm(in) Ø70 (2.75").
(4) Spindle motor: kw (hp) 7.5/11 (10/15).
4. Feedrate:
(1) Rapid traverse X-axis: mm/min (ipm) 30000/36000.opt / (1181/1417.opt).
(2) Rapid traverse Y-axis: mm/min (ipm) 30000/36000.opt / (1181/1417.opt).
(3) Rapid traverse Z-axis: mm/min (ipm) 30000/36000.opt / (1181/1417.opt).
(4) Cutting federate: mm/min (ipm) 1~10000 (0.04~394).
1. No. of tools: tools: 40 / OPT.60 / OPT.90 / OPT.120. 2. Pull stud: P40T-1. 3. Max tool weight: kg (lb): 8 (17.64). 4. Max tool length: mm (in.): 300 (11.81"). 5. Max tool dlameter: mm (in.): Ø85 (33.4"). 6. Max tool dlameter(no adjacent tool): mm (in.): Ø140 (5.51"). 7. Tool change time (t-t): sec.: 3~4 SEC. (60HZ). 8. Tool change time (c-c): sec.: 6 SEC. (60HZ). 9. Number of pallets: 2. 10. Method of pallet change: rotary. 11. Pallet change time: 8 SEC. (60HZ). 12. Floor space: mm (in.): 3838 x 4835 (151.1" x 190.35"). 13. Machine weight (N.W.): kg (lb): 13500 (29768). 14. Max. machine height: mm (in.): 2960 (116.54"). 15. Power capacity: Kva: 45. 16. Air source: kgf/cm2 (psi): 6~8 (85~114).
Taiwan
