1. Features:
(1) All castings are properly stabilized and stress relieved.
(2) Bed ways are hardened & ground to min. HS-70.
(3) Turcite B coating between the bed and carriage.
(4) Extremely low noise level.
(5) Foot brake pedal provided.
(6) Built-in coolant pump & fitting provided.
(7) CSS (constant surface speed control) on request for E.V.S. model.
(8) Wider bed way which gives absorbs vibration.
2. Lubrication:
(1) Oil sight window for efficient check of oil level action.
(2) Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting.
(3) Splash lubricationin feed gearbox & apron.
3. Headstock:
(1) Housing is vibration-absorbent, deflection-free.
(2) Gears are hardened & MAAG or REISHAUER ground.
4. Gear box:
(1) Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
(2) Induction hardened and precision ground gears.
5. Apron:
(1) R/H or L/H wheel can be available on request.
(2) Integrated automatic control for longitudinal and cross feeds, forward & reverse feeds.
6. Carriage and slide:
(1) Anti-Float design backlash eliminator fitted in cross slide nut.
(2) Safety clutch at feed shaft.
(3) One shot lubrication in carriage and top slide.
(4) Dual dials supply inch system screw.
(5) Metric dial supply metric system only.
7. Safety features:
(1) Nylon safety gears in end train.
(2) Shear pin in leadscrew.
8. Heavy duty spindle:
(1) Machined from forged alloy steel, hardened ground and dynamically balanced.
(2) Three point support by high grade precision, machine tool taper roller and ball bearings.
1. Standard accessories: (1) Backplate for 12" chuck. (2) Dead center MT.5. (3) Dead center MT.5 with carbide tip. (4) Spindle center sleeve MT.7. (5) Level pads: 8 pcs. (6) Tool set & Box. (7) Operation manual & parts list. 2. Optional accessories: (1) 3-Jaws scroll 12" chuck. (2) 4-Jaws independent chuck 12" for 18....or 14" for 21... (3) 5C collet closer attachment. (4) 5C collets (metric or inch). (5) Chuck safety guard. (6) Hydraulic copying attachment. (7) Tool post grinder attachment. (8) Taper turning attachment. (9) Electrical system for CE. (10) Protect cover on leadscrew for CE. (11) Steady rest w/ball bearing. (12) Follow rest w/bronze tip. (13) Faceplate 14". (14) Drill chuck & arbor. (15) Rotating center MT.5. (16) Halogen lamp. (17) Quick change tool post. (18) Carriage micro stop set. (19) Digital read out system. (20) Full length splash guard. 3. Please refer to the attached file for the specification details.
Taiwan
