1. Various materials and hardness for customer's option, include FKM, Nitrile, EP, silicone, ACM, flour silicone, alfas, polyurethane, neoprene, etc. 2. All o-rings are made according to international standard: ISO 3601, AS 568A, DIN 3771, ...
O ring kits: 1. The most inexpensive and economical sealing element. 2. All major compounds are available. 3. All o-rings are made according to international standard. 4. ISO3601, AS568A DIN3771, BS1806. 5. Cords are produced by extrusion.
1. O-ring: (1) AS568A, metric, JIS B2401. (2) All type of materials. (3) Smallest 0.5 mm ID x 0.5 mm C/S. (4) Largest OD=800mm. 2. Hydraulic seals: (1) Rubber materials. (2) Rod seals, piston seals, wipers, cushioning seals, rotary seals. (3) ...
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
| Company Name : | Best Ring Industrial Corporation |
|---|---|
| Contact Person : | Mr. Paul Hsiao  |
| Address : | No. 36, Lane 148, Li De St., Chung Ho Di |
| Country : |  Taiwan |
| Telephone : | 886-2-32349977 |
| Fax : | 886-2-32349288 |
