1. On-line uninterruptible power supply (UPS).
2. Interface:
(1) RS232 interface: upsilon 2000 monitoring software.
(2) SNMP intelligent slot: for net agent II (option) with SNMP manager and web browser.
1. Input: (1) Rated power: 1000VA / 700W. (2) Nominal voltage: 220VAC. (3) Voltage range: 160 ~ 300VAC (70% to 100% load). (4) Frequency: 50 / 60Hz + 8%. (5) Power factor: > 0.95. 2. Output: (1) Voltage: 220VAC + 2% (230V or 240V re-settable via LCD panel). (2) Frequency: 50 / 60Hz + 0.5%. (3) Distortion: < 3% for linear load. (4) Capacity: 105% ~ 150% for 30 sec., >150% for 200ms. (5) Crest ratio: 3 : 1. (6) Waveform: true sine wave. 3. Battery: (1) Type: maintenance free sealed lead-acid battery. (2) Capacity: 12V / 7AH * 3pcs. (3) Back-up (full/half load): > 7min / 18min. (4) Built-in charger: 1A. (5) Charger (option): built-in 8A charger. (6) Recharge time: 5 hrs to 90% of full capacity after full load discharge. 4. Bypass (1) Automatic: overload and UPS failure. (2) By Setting: voltage range: 176V ~ 256V + 20% (re-settable via LCD panel). (3) Transfer time: 0 ms ( 2.5ms inverter to bypass). 5. Display removable: LCD: UPS status, input & output voltage & frequency, load %, battery voltage & %, temperature, model spec., event log. 6. Audible alarm: (1) Battery mode: beeping every 4 Sec. (re-settable) and per second when battery low. (2) Overload: beeping twice per second. (3) Fault: beep continuously. 7. Output: (1) Socket for tower: NEMA 5 - 15R * 3pcs or IEC320 * 4pcs. (2) Socket for rack (2U): NEMA 5 - 15R * 4pcs or IEC320 * 4pcs.
Taiwan
